So this follows on from the first part and adds MIDI, some buttons to control the keyboard and gives it a voice of its own. https://youtu.be/NUaCPR0LRTM Warning! I strongly recommend using old or second hand equipment for your experiments. I am not responsible for any damage to expensive instruments! If you are new to microcontrollers, … Continue reading Yet Another Toy Keyboard USB MIDI Controller – Part 2
In this second part of my Simple MIDI Serial Monitor I show how to use MIDI callbacks to handle the data and show how an independent serial interface could be used as the diagnostic port, thus allowing the hardware serial port to be used with MIDI. Warning! I strongly recommend using old or second hand equipment … Continue reading Simple MIDI Serial Monitor – Part 2
This blog is full of MIDI projects, but I've just realised that I've never really done a "MIDI Data Dumper" type project, so building on my Simple MIDI Monitor and using the many MIDI transport options from Arduino Multi MIDI Merge, here is a serial MIDI data dumper. In Part 2 I show how to do the … Continue reading Simple MIDI Serial Monitor
Ok, I admit, there is a bit of a theme to some of my projects, but this keyboard that I found in a charity shop was such a dinky thing that I had to do Just One More (TM). Warning! I strongly recommend using old or second hand equipment for your experiments. I am not … Continue reading Yet Another Toy Keyboard USB MIDI Controller
It's been a while since my last Lo-Fi Orchestra performance, so today I thought I'd do something special. If you follow my blog, you might know I quite like contemporary ideas in music. I implemented Steve Reich's Music for Pieces of Wood on relays and have experimented with phasing in relays, sequences and more recently … Continue reading Lo-Fi Orchestra – 4’33”
Having built my adaptor into a small box, I've gone back to add a mode button so I can include all the different applications into a single sketch. This builds on the previous parts in this series. Part 1 - Understanding the telephone hardware and interfacing to an Arduino. Part 2 - Decoding the rotary … Continue reading Vintage Rotary Phone MIDI Controller – Part 7
I've an idea for a project that needs to wait for a certain length of time and then trigger a relay. So whilst this isn't a specifically musical post at present, this is the detail of how I got that part of the project ready to go. Warning! I strongly recommend using old or second … Continue reading Arduino Timed Relay
There is an interesting video going around social media of someone playing a simple drum beat at 120bpm, 119bpm and 121bpm and you can hear the rhythms going in and out of phase, so I thought it perhaps time to update my Arduino Mux Slider Phased Relays to actually play a rhythm. https://youtu.be/hpoJ7eNfn_8 Warning! I … Continue reading Arduino Slider Phased Rhythms
The other application I wanted for my Arduino USB MIDI Mux Step Sequencer is as a general purpose MIDI controller. In this case with 16 potentiometers mapped to MIDI CC messages. This is building on the following previous projects: Arduino USB MIDI Mux Step Sequencer Arduino and USB MIDI “Bare Metal” Raspberry Pi Synth – Part … Continue reading Arduino USB MIDI Mux Pot Controller
This post revisits an older project - the Arduino MIDI Mux Step Sequencer. Or more specifically, part 2 of that project that used an off-the-shelf 16-potentiometer shield for an Arduino Uno. Except this time, I've paired it with the "upgrade" to my Arduino Uno to make it USB MIDI compliant. https://youtu.be/amagp7ANns4 Warning! I strongly recommend using … Continue reading Arduino USB MIDI Mux Step Sequencer
Simple DIY Electronic Music Projects 