Arduino USB MIDI Mux Pot Controller

The other application I wanted for my Arduino USB MIDI Mux Step Sequencer is as a general purpose MIDI controller. In this case with 16 potentiometers mapped to MIDI CC messages. This is building on the following previous projects: Arduino USB MIDI Mux Step Sequencer Arduino and USB MIDI “Bare Metal” Raspberry Pi Synth – Part … Continue reading Arduino USB MIDI Mux Pot Controller →

Arduino USB MIDI Mux Step Sequencer

This post revisits an older project - the Arduino MIDI Mux Step Sequencer. Or more specifically, part 2 of that project that used an off-the-shelf 16-potentiometer shield for an Arduino Uno. Except this time, I've paired it with the "upgrade" to my Arduino Uno to make it USB MIDI compliant. https://youtu.be/amagp7ANns4 Warning! I strongly recommend using … Continue reading Arduino USB MIDI Mux Step Sequencer →

Arduino MIDI Mux Step Sequencer – Part 2

By way of completing this initial look at multiplexing potentiometers, this is how I used a Sparkfun 16 port multiplexer in my Arduino MIDI Step Sequencer. https://youtu.be/MiPyJrPlmVs Warning! I strongly recommend using an old or second hand keyboard for your MIDI experiments. I am not responsible for any damage to expensive instruments! These are the key Arduino … Continue reading Arduino MIDI Mux Step Sequencer – Part 2 →