Lo-Fi Orchestra – John Miles Music

The Lo-Fi Orchestra presents this performance of "Music" by John Miles. "Music was my first love, and it will be my last.Music of the future, and music of the past. To live without my music, would be impossible to do.In this world of troubles, my music pulls me through." -- John Miles (1947-2021) … Continue reading Lo-Fi Orchestra – John Miles Music →

MIDI IN for the Raspberry Pi Pico

I was in need of another MIDI IN device, so I thought it would be useful to have another "pack" style interface that supported MIDI IN for new MIDI monitoring type projects. You can see all the other DIY options for Pico MIDI interfaces here: DIY MIDI Interfaces. Warning! I strongly recommend using old or second … Continue reading MIDI IN for the Raspberry Pi Pico →

Raspberry Pi Pico Multi MIDI Router

In this project I've combined my Raspberry Pi Pico MIDI Channel Merger and my Raspberry Pi Pico MIDI Channel Router to create a more general 6-IN, 6-OUT MIDI routing device. This project uses the two hardware UARTs on a Raspberry Pi Pico along with four "PIO" UARTs to give the six MIDI IN and OUT ports. Part … Continue reading Raspberry Pi Pico Multi MIDI Router →

Raspberry Pi Pico MIDI Channel Merger

This is my second try at using the Raspberry Pi Pico Programmable Input Output (PIO) peripherals. My previous attempt was for a MIDI channel router. This time, I'm building a MIDI channel merger. The basic idea is to use the Raspberry Pi PIO to create 8 MIDI IN ports and merge them all into a … Continue reading Raspberry Pi Pico MIDI Channel Merger →

Pico Unicorn MIDI Visualiser

I've been waiting to use my Pimoroni Unicorn Pack for the Raspberry Pi Pico for some time, so decided to start off with a remake of my TFT MIDI Display - Part 3. https://youtu.be/-Sd64LAgyfw Warning! I strongly recommend using old or second hand equipment for your experiments. I am not responsible for any damage to expensive … Continue reading Pico Unicorn MIDI Visualiser →

Arduino Multi MIDI Merge

I've already had a basic MIDI merge project, combining USB MIDI and serial MIDI into a single serial MIDI out (see Arduino USB MIDI Merge). This project takes that forward to provide the options for a whole range of MIDI IN interfaces merging to a single MIDI OUT. In Part 2 I develop the code … Continue reading Arduino Multi MIDI Merge →

Raspberry Pi I2S Audio Interface

This post looks at how to use a cheap I2S digital to analog converter as the audio output interface for a Raspberry Pi V1 model B and a Raspberry Pi Zero V1. As I mentioned last time, there are a number of ready-made "off the shelf" add-on boards you can get for the Raspberry Pi … Continue reading Raspberry Pi I2S Audio Interface →

Raspberry Pi Zero PWM Audio Interface

The Raspberry Pi Zero (I'm talking about V1 here, with no wireless. At the time of writing, V2 has just been released and I've yet to have a play with that!) has capabilities on par with the first generation "full" Raspberry Pi, so I was keen to try my “Bare Metal” Raspberry Pi Synth on one. … Continue reading Raspberry Pi Zero PWM Audio Interface →

Raspberry Pi v1 Model B Synth Board

If you've been following along, you'll know I've been playing around with an original Raspberry Pi v1 model B as the engine for some digital sound synthesis. This is a slight project tangent to build an analog IO and MIDI add-on board. Note that this does not conform to any standard for Raspberry Pi add-ons … Continue reading Raspberry Pi v1 Model B Synth Board →

“Bare Metal” Raspberry Pi Synth – Part 3

This project uses an off-the-shelf analog IO board for the Raspberry Pi for my "bare metal" Raspberry Pi v1 (model B) synth. Full index of posts in this series: Part 1: The basics of setting up an environment to build a “bare metal” Raspberry Pi synth application. Part 2: Adding potentiometer controls via an MCP3008 … Continue reading “Bare Metal” Raspberry Pi Synth – Part 3 →